What is the process and usage of PP Rubber tray?
In the production process of tires, PP Rubber Tray and PP Plastic Tray are a type of rubber tire. The bead pad of the tire is disc-shaped, and the curvature of the disc-shaped pad matches the rubber tire. There are several protruding parts on the inner wall of the triangular rubber shaping disc bead pad, a stepped part at the bottom of the shaping partition, a large through hole in the middle of the partition, and a protruding part at the bottom and around the through hole of the partition. The fixed partition is made of plastic. The bead pad has the advantages of no rubber bonding after tire molding, good tire molding quality, good heat dissipation, and no deformation during the molding process.
PP Tire Pad is mainly used for placing steel wire triangular rubber isolation process in the tire production process. The product is heat-resistant and anti stick, allowing the steel wire triangular adhesive to be properly stacked and shaped.
Process application: Tire partition is a type of fixed partition for rubber tires, mainly used for the isolation process of steel wire triangular rubber during tire production. Its characteristics are: the product is heat-resistant, anti sticking, and allows the steel wire triangular rubber to be fixed and stacked together. The bead pad is disc-shaped, and the curvature of the disc-shaped plate matches the rubber tire.
The function of tire partition is to prevent direct contact between two workpieces from damaging them due to excessive pressure, and to increase the stress area. In addition to the above functions, the gasket also has a certain sealing effect depending on the material.
The above is the relevant knowledge of tire bead pads that we have introduced to you. We hope that the above introduction can provide you with some tips and help.
